150 Milliwatts ZigBee/BLE CC2651R3 Dongle

N724AP CC2651R3 Zigbee /BLE Dongle based TI CC2651R3 2.4 GHz wireless mcu , CC2592 and USB to uart chip, the Zigbee/BLE dongle designed for 2.4G band. It can be debug or program by customize. The CC2651R3 dongle has +22 dBm output power and the sensitivity down to -102 dBm at 250 kbps. The dongle support Zigbee 3.0 ,BLE 5.2 and thread and so on.

The CC2651R3 Dongle‍ has a small private USB shell, Integrated buttons and dual color LED 3528, cc2651R3, CC2592, cp2102 and pcb   antenna, with the specialized custom shell, it reduced a lot of development troubles.

N724AP dongle hardware is designed for maximum range, 500m + Range (Low rate and Line of Sight).

The N724AP Private Shell By Coral RF

CC2651R3 Features

• Powerful 48-MHz Arm Cortex-M4 processor

• 352KB flash program memory

• 32KB of ultra-low leakage SRAM

• 8KB of Cache SRAM (Alternatively available as general-purpose RAM)

• Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC

• Supports over-the-air upgrade (OTA)

N724AP CC2651R3 Wireless protocols

• Zigbee®

• Bluetooth® 5.2 Low Energy

• SimpleLink™ TI 15.4-stack

• Proprietary systems

N724AP CC2651R3 Dongle radio

• -107 dBm for Bluetooth® Low Energy 125-kbps

• Output power up to +22 dBm with temperature compensation

N724AP CC2651R3 Dongle UART baud

• UART baud up to 3Mbps.

N724AP CC2651R3 Dongle Parameters

How to used N724AP Dongle ?

1. KEY, LED, DEBUG, SWITCH port circult

1) KEY circult

2) LED circult

3) Debug Port

4, UART port

5, CC2592 LOGIC circult

2. RF test

step 1:

connect N724AP to XDS110

step 2:

1) Open smart RF studio 7,

2) Open CC2651R3 interface,

3) SET CC2592 IO

Then you can proceed with RF testing.

3. UART test

step 1:

Download the fireware to CC2651r3

step 2:

install CP2102 driver

step 3:

send the data from putty, then can receive data from N724AP dongle.

Download

CC2651R3 datasheet‍‍‍     

N724AP datasheet

CP2102 DRIVER‍