150 Milliwatts CC2652R7 CC2592 ZigBee BLE Dongle

Coral RF
2024-12-18

150 Milliwatts ZigBee/BLE CC2652R7 Dongle

150 Milliwatts ZigBee/BLE CC2652R7 Dongle

N725AP CC2652R7 Zigbee /BLE Dongle based TI CC2652R7 2.4 GHz wireless mcu , CC2592 and USB to uart chip, the Zigbee/BLE dongle designed for 2.4G band. It can be debug or program by customize. The CC2652R7 dongle has +22 dBm output power and the sensitivity down to -102 dBm at 250 kbps. The dongle support Zigbee 3.0 ,BLE 5.2 and thread and so on.

The CC2652R7 Dongle‍ has a small private USB shell, Integrated buttons and dual color LED 3528, cc2652R7, CC2592, cp2102 and pcb   antenna, with the specialized custom shell, it reduced a lot of development troubles.

N725AP dongle hardware is designed for maximum range, 500m + Range (Low rate and Line of Sight).


The N725AP Private Shell By Coral RF

The N725AP Private Shell By Coral RF

CC2652R7 Features

  • Powerful 48-MHz Arm® Cortex®-M4F processor

  • 704KB flash program memory

  • 256KB of ROM for protocols and library functions

  • 8KB of cache SRAM

  • 144KB of ultra-low leakage SRAM with parity for high-reliability operation

  • Dynamic multiprotocol manager (DMM) driver

  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC

  • Supports over-the-air upgrade (OTA)

N725AP CC2652R7 Wireless protocols

  • Thread, Zigbee®, Matter

  • Bluetooth® 5.2 Low Energy

  • SimpleLink™ TI 15.4-stack

  • 6LoWPAN

  • Proprietary systems

N725AP CC2652R7 Dongle radio

  • -106 dBm for Bluetooth® Low Energy 125-kbps

  • Output power up to +22 dBm with temperature compensation

N725AP CC2652R7 Dongle UART baud

  • UART baud up to 3Mbps.

N725AP CC2652R7 Dongle Parameters

Protocols                                               

IEEE 802.15.4, 6LoWPAN, ZigBee

Frequency bands (MHz)                     

2400-2480

TX power (Max) (dBm)                        

22

RAM (KB)                                               

88

CPU core                                                 

Arm® Cortex®-M4F

Peripherals                                               

USB, LED, KEY

RX current (lowest) (mA)                   

15 mA

Data rate (Max) (kbps)                      

2000 kbps

Operating temperature range (°C)

-30 to 75 °C

Package                                                   

USB 2.0

Size       

37x17x7mm

Antenna Interface             

PCB antenna, IPEX


How to used   N725AP Dongle ?

1. KEY, LED, DEBUG, SWITCH port circult

1) KEY circult

N725AP Dongle key circult

2) LED circult

N725AP Dongle LED circult

3) Debug Port

N725AP Dongle Debug Port

4, UART port

N725AP UART port circult

5, CC2592 LOGIC circult

N725AP CC2592 LOGIC circult

2. RF test

step 1:

connect N725AP to XDS110

XDS110 connector

N725AP connector

3V3

VDD_EB

GND

GND

NRST

nRESET

TMS

JTAG_TMS

TCK

JTAG_TCK



step 2:

1) Open smart RF studio 7,

N725AP Open smart RF studio 7

2) Open CC2652R7 interface,

N725AP Open CC2652R7 interface

3) SET CC2592 IO

N725AP SET CC2592 IO

Then you can proceed with RF testing.

3. UART test

step 1:

Download the fireware to CC2652R7

N725AP Download the fireware to CC2652P

step 2:

install CP2102 driver


step 3:

send the data from putty, then can receive data from N725AP dongle.


Download

CC2652R7 datasheet‍‍‍     

N725AP datasheet

CP2102 DRIVER‍


share