2000 Milliwatts cc1125 PA Module, 169/433/868/915Mhz

N518BS module based TI CC1125 narrowband wireless chip, pa, the module designed for 169/433/868/915Mhz narrowband band. It can be program for customize. The N518BS module has +33 dBm output power and the sensitivity down to -126 dBm at 1.2 kbps. The module support long distance data broadcast and thread.

The C1125 module has a small SMD package, Integrated cc1125 and pa and IPEX, it reduced a lot of development troubles.

N518BS module hardware is designed for maximum range, 18000m + Range (Low rate and Line of Sight).

CC1125 Features

• High-Performance, Single-Chip TransceiverAdjacent Channel Selectivity: 67 dB at 6.25-kHz Offset

• Blocking Performance: 104 dB at 10 MHz

• Excellent Receiver Sensitivity–129 dBm at 300 bps

• –123 dBm at 1.2 kbps

• –110 dBm at 50 kbps

• Very Low Phase Noise: –115 dBc/Hz at 10-kHz Offset

• Suitable for Systems Targeting ETSI Category 1

• Separate 128-Byte RX and TX FIFOs

• Power SupplyWide Supply Voltage Range (2.0 V to 3.6 V)

• Low Current Consumption:RX: 2 mA in RX Sniff Mode

• RX: 17 mA Peak Current in Low-Power Mode

• RX: 26 mA Peak Current in High-Performance Mode

• TX: 47 mA at +14 dBm

• Power Down: 0.12 μA (0.5 μA With Enhanced Wake-On-Radio (eWOR) Timer Running)

• Programmable Output Power up to +16 dBm With 0.4-dB Step Size

• Automatic Output Power Ramping

• Configurable Data Rates: 0 to 200 kbps

• Supported Modulation Formats: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOK

• WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect Performance

• Regulations – Suitable for Systems Targeting Compliance WithEurope: ETSI EN 300 220 Category 1, ETSI EN 54-25, ETSI EN 300 113, and EN 301 166

• US: FCC CFR47 Part 15, 24, 90, 101

• Japan: ARIB RCR STD-T30, T-67, T-108

• Peripherals and Support FunctionseWOR Functionality for Automatic Low-Power Receive Polling

• Support for Retransmissions

• Support for Auto-Acknowledge of Received Packets

• TCXO Support and Control, also in Power Modes

• Automatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) Systems

• Built-in Coding Gain Support for Increased Range and Robustness

• Digital RSSI Measurement

• Temperature Sensor

N518BS CC1125 Module Wireless protocols

• 6LoWPAN,

• IEEE 802.15.4,

• Proprietary,

• Wireless M-Bus

• Sigfox

N518BS CC1125 Module Parameters

N518BS CC1125 Module pinout Description

N518BS Module Package

How to used N518BS Module

1. PA, LNA, SWITCH user's guide

Note: TXEN, RXEN, LNAEN, VTCXO is connect to MCU IO port, the IO is 3.3V cmos level. The max cmos level is 3.6V.

2. VTCXO user's guide

For Power On:

step 1: power the module

step 2: power the VTCXO, delay 2ms

step 3: register the module

step 4: TX and the data

For Power OFF:

step 1: TX and the data

step 2: register the module to power off

step 3: delay 2ms, power off the VTCXO

For WOR or LBT:

step 1:   delay 2ms, power the VTCXO

step 2: run WOR or LBT

step 3: TX and the data,

step 4: register the module

step 5: delay 2ms, power the VTCXO

Note: for more information please contact with us.

3. N518BS Module test user's guide

connect ccdebugger or MCU to N518BS Module

For ccdebugger:

step 1:

step 2 TX data:

step 3 RX data:

For MCU:

Please view the example:

N518BS Code

N518BS File Download

CC1125 datasheet‍‍‍     

N518BS datasheet‍