CC1201 CC1190 Module, +27dBm, N516DS-B
- Detail
- Parameters
N516DS-B radio module based CC1201 and CC1190 chip.
N516DS-B CC1201 module designed for 868M and 915M system. Up to 27dBm output power and Sensitivity down to -123dBm.
N516DS-B based CC1201 and CC1190 chip. Designed for 868M and 915Mhz band. SPI control. Up to 27dBm output power and Sensitivity down to -123dBm. N516DS-B has SMD installation mode. Use FSK modulation. N516DS-B hardware is designed for maximum range,5000m + Range (Line of Sight).
ISM Frequency supported by N516DS-B module
868M band: 868 MHz to 870 MHz (China, EU, USA), 888 MHz to 889 MHz (Australia)
915M band: 902 MHz to 928 MHz (USA)
N516DS-B Parameter
Module | Introduce |
Interface | SPI |
Frequency | 860-960Mhz |
RF Data Rate | 0-200Kbps |
TX Power | +27dbm |
RX Sensitivity | -123dBm |
TX Current | 500mA |
RX Current | 28mA |
Frequency Deviation | +/- 10Khz |
Communication Distance | 10 - 5000m(Visual distance) |
Antenna Interface | RF pin, IPEX |
Installation Mode | SMD, plug-in |
Volume (mm) | 29.5mm x 21mm x 3mm |
Operating Voltage | 2 to 3.6V |
Working Temperature and Humidity Environment | Temperature: -30 to 70℃; Humidity 10-95%RH |
Storage Temperature and Humidity Environment | Temperature: -40 to 80℃; Humidity 10-95%RH |
Weight (kg) | ≈10g |
N516DS-B PIN define
Pin name | Description | Pin name | Description | ||
1 | GND | Ground | 9 | GPIO3 | MCU I/O |
2 | VCCPA | 2-3.9V | 10 | GPIO2 | MCU I/O |
3 | VCC | 2-3.6V | 11 | MOSI | SPI |
4 | TCXO | NC | 12 | SCK | SPI |
5 | HGM | MCU I/O | 13 | MISO | SPI |
6 | LNAEN | MCU I/O | 14 | GPIO0 | MCU I/O |
7 | PAEN | MCU I/O | 15 | CS | SPI |
8 | RESET | MCU I/O | 16 | GND | Ground |
N516DS-B typical application circuit
N516DS-B module pin diagram
N516DS-B module packaging diagram
Ordering information
N516DS-B-868M CC1201+CC1190 27dBm, FSK, 860-880MHz
N516DS-B-915M CC1201+CC1190 27dBm, FSK, 910-960MHz