N623PA CC1311R3 CC1190, +27dBm
- Detail
- Parameters
Radio module based TI CC1311R3 and CC1190 chip.
N623PA designed for 868MHz and 915MHz band. AT command support.
Up to 27dBm output power, 50 kbps sensitivity is -112dBm. The module is mainly for Internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N623PA module leads most pins out of CC1311R3 for secondary development.
N623PA (CC1311R3) is suitable for free frequency band in EU and USA.
ISM Frequency supported by N623PA module
770M band: 770 MHz to 780 MHz (China)
868M band: 868 MHz to 870 MHz (China, EU, USA)
888 MHz to 889 MHz (Australia)
915M band: 902 MHz to 928 MHz (USA)
CC1311R3 module up to 27dBm output power, 50 kbps sensitivity is -112dBm.
| RF Interface | Parameter | Introduce |
| Frequency | 868MHz, 915MHz | Support ISM |
| Output Power | +27dBm | The maximum power 25mW |
| Sensitivity | -112dBm | 50kbps |
| Symbol Rate | 0.3-4000kbps | Software programming control |
| Deviation | +/-10kHz | Antenna interface |
| Distance | 8000m | In clear and open environment, the antenna gain is 3 dBi, the height above the ground is 2.5 meters, and the air speed is 1.2 kbps. |
| Hardware parameters | Value | Remarks |
| Size | 32.8 x 24.6 x 3mm | - |
| Antenna Interface | IPEX, stamp hole | - |
| Communication Interface | UART, SPI | Software programming |
| Package | SMD | - |
| Electrical Parameters | Minimum | Typical | Maximum | Remarks |
| Volt | 1.8V | 3.3V | 3.6V | |
| Emission Current | 450mA | Instantaneous power consumption | ||
| Receiving Current | 10mA | - | ||
| Sleep current | 1uA | Software programming control | ||
| Working Temperature | -30℃ | 75℃ | - |
N623PA's CC1190 control Logic
N623PA's Pin Definition
Ordering information
N623PA-868M CC1311R3+CC1190 27dbm, 860Mhz-880Mhz
N623PA-915M CC1311R3+CC1190 27dbm, 910Mhz-930Mhz
Files download