Radio module based CC1312R, PA and LNA.
N533ES integrated TI CC1312R chip, which is suitable for 868MHz / 915MHz band. CC1312R module has the characteristics of low cost, low power consumption and small size. The module is designed with 4-layer board, with excellent impedance matching and anti-interference. The module is mainly for Internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. CC1312R module leads all pins out for secondary development.
|Frequency||433M, 860MHz, 960MHz||Support ISM|
|Output Power||+30dBm||The maximum power 25mW|
|Symbol Rate||0.3-4000kbps||Software programming control|
In clear and open environment, the antenna gain is
3 dBi, the height above the ground is 2.5 meters,
and the air speed is 1.2 kbps.
|Module Size||34 x 22 x 3mm||-|
|Antenna Interface||IPEX, stamp hole||-|
|Communication Interface||UART, SPI||Software programming|
|Emission Current||24mA||Instantaneous power consumption|
|Sleep current||1uA||Software programming control|
Test method of N533ES module
Take the supporting base plate of Heyan technology as an example:
The bottom board of N533ES is T532AP, which integrates USB to serial chip, led, button, burning port and module card port. As shown in the figure:
N533ES secondary development method:
The CC1312R module is stuck on the backplane as shown in the figure, and the IPEX is connected with the antenna. The burning port is connected with xds110 according to the silk screen printing, and then online simulation can be carried out to test the performance of the module.
The schematic diagram of the module base plate can be obtained from our official website.
Please contact us for specific programming information or download it from TI official website www.ti.com.