CC1312R CC1190, +27dBm, N621PA

  • Detail
  • Parameters

Radio module based TI CC1312R and CC1190.

N621PA CC1312R module designed for 868MHz and 915MHz band. Up to 27dBm output power, 50 kbps sensitivity is -112dBm.

Up to 27dBm output power, 50 kbps sensitivity is -112dBm.   The module is mainly for Internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N621PA module leads most pins out of CC1312R for secondary development.

N621PA (CC1312R) is suitable for free frequency band in EU and USA.

CC1312R Introduce

The SimpleLink™CC1312R device is a multiprotocol Sub-1 GHz wireless microcontroller (MCU) supporting IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY, Wi-SUN, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz). The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, smart meters, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Flexible Sub-1 GHz radio supporting industry standard frequency bands (315 MHz, 433 MHz, 868 MHz, 900 MHz, and more) to meet the industrial needs.

  • Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK) including complete SimpleLink™ 15.4-Stack (Sub-1 GHz) solution.

  • Maximum transmit power of +14 dBm at Sub-1 GHz with 24.9 mA current consumption.

  • Longer battery life wireless applications with low standby current of 0.85 µA and full RAM retention.

  • Industrial temperature ready with lowest standby current of 11 µA at 105°C.

  • Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1 µA system current.

  • Low SER (Soft Error Rate) FIT (Failure-in-time) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.

  • Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.

  • Excellent radio sensitivity (-121 dBm) and robustness (selectivity and blocking) performance for SimpleLink™ long-range mode.

The CC1312R device is part of the SimpleLink™ MCU platform, which consists ofWi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

ISM Frequency supported by N620PA module

770M band: 770 MHz to 780 MHz (China)

868M band: 868 MHz to 870 MHz (China, EU, USA)

                       888 MHz to 889 MHz (Australia)

915M band: 902 MHz to 928 MHz (USA)

If you need N621PA module to support other frequencies, please contact us.

RF InterfaceParameterIntroduce
Frequency868MHz, 915MHzSupport ISM
Output Power+27dBmThe maximum power 500mW
Symbol Rate0.3-4000kbpsSoftware programming control
Deviation+/-10kHzAntenna interface

In clear and open environment, the antenna gain

is 3 dBi, the height above the ground is 2.5 meters,

and the air speed is 1.2 kbps.

Hardware parametersValueRemarks
Size32.8 x 24.6 x 3mm-
Antenna InterfaceIPEX, stamp hole-
Communication InterfaceUART, SPISoftware programming

Electrical ParametersMinimumTypicalMaximumRemarks
Emission Current
Instantaneous power consumption
Receiving Current
Sleep current
Software programming control
Working Temperature-30℃

N621PA's CC1190 control Logic

N621PA's CC1190 control Logic

Pin Definition

CC1312R CC1190 Module, 868MHz, pin definition

CC1312R CC1190 Module,868MHz, Layout

Test method of N621PA module

Take the supporting base plate of Heyan technology as an example:

The bottom board of N621PA is T532AP, which integrates USB to serial chip, led, button, burning port and module card port. As shown in the figure:

CC1312R Module,CC1312R Module test

N621PA secondary development method:

The CC1312R module is stuck on the backplane as shown in the figure, and the IPEX is connected with the antenna. The burning port is connected with xds110 according to the silk screen printing, and then online simulation can be carried out to test the performance of the module.

Module Programming

The schematic diagram of the module base plate can be obtained from our official website.

Please contact us for specific programming information or download it from TI official website www.ti.com.

Output Power
Coral RF