N625PA-CC1352P7 CC1190 CC2592 Module, +27dBm
- Detail
- Parameters
FSK Radio module based TI CC1352P7 CC1190 and CC2592.
N625PA CC1352P7 FSK radio module designed for 868MHz, 915MHz and BLE 5.2 band. At 868/915Mhz, the output power reaches up to 27dBm while the 50kbps sensitivity is -112dBm. At 2440Mhz, the output power reaches up to 22dBm while the 250kbps sensitivity is -102dBm.
N625PA module is mainly for Internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N625PA module leads most pins out of CC1352P7 for secondary development. N625PA (CC1352P7) is suitable for free frequency band in EU and USA.
N625PA module Parameters
RF Interface | Parameter | Introduce |
Frequency | 868MHz, 915MHz, 2.4ghz | Support ISM |
Output Power | +27dBm, At 868/915Mhz +22dBm, At 2400Mhz | The maximum power 500mW, At 868/915Mhz The maximum power 150mW, At 2400Mhz |
Sensitivity | -112dBm, At 868/915Mhz -102dBm, At 2440Mhz | Test by 50kbps, At 868/915Mhz Test by 250kbps, At 2440Mhz |
Symbol Rate | 0.3-4000kbps | Software programming control |
Deviation | +/-10kHz | Antenna interface |
Distance | 8000m | In clear and open environment, the antenna gain is 3 dBi, the height above the ground is 2.5 meters, and the air speed is 1.2 kbps. |
Hardware parameters | Value |
Size | 42 x 40 x 3mm |
Antenna Interface | IPEX, stamp hole |
Interface | UART, SPI |
Package | SMD |
Electrical Parameters | Minimum | Typical | Maximum |
Volt | 1.8V | 3.3V | 3.9V |
Emission Current | 500mA | ||
Receiving Current | 10mA | ||
Sleep current | 1uA | ||
Working Temperature | -30℃ | 75℃ |
N625PA's CC1190 control Logic
IO | TX | RX | SLEEP |
DIO30 | 1 | 0 | 0 |
DIO29 | 0 | 1 | 0 |
DIO30 | 1 | 1 | 0 |
N625PA Pinout Description
Pin Number | Function | Describe |
1 | RF | |
2 | GND | |
3 | NC | |
4 | NC | |
5 | NC | |
6 | NC | |
7 | NC | |
8 | NC | |
9 | NC | |
10 | DIO8 | MCU IO port |
11 | DIO9 | MCU IO port |
12 | DIO10 | MCU IO port |
13 | DIO11 | MCU IO port |
14 | DIO12 | MCU IO port |
15 | DIO13 | MCU IO port |
16 | DIO14 | MCU IO port |
17 | VCCPA | VCCPA |
18 | VCC | VCC |
19 | GND | GND |
20 | RESET | RESET |
21 | DIO15 | MCU IO port |
22 | TMS | TMS |
23 | TCK | TCK |
24 | DIO16 | MCU IO port |
25 | DIO17 | MCU IO port |
26 | DIO18 | MCU IO port |
27 | DIO19 | MCU IO port |
28 | DIO20 | MCU IO port |
29 | DIO21 | MCU IO port |
30 | DIO22 | MCU IO port |
31 | DIO23 | MCU IO port |
32 | DIO24 | MCU IO port |
33 | DIO25 | MCU IO port |
34 | DIO26 | MCU IO port |
35 | DIO27 | MCU IO port |
36 | GND | MCU IO port |
N625PA's Pinout Description
ISM Frequency supported by N625PA module
770M band: 770 MHz to 780 MHz (China)
868M band: 868 MHz to 870 MHz (China, EU, USA), 888 MHz to 889 MHz (Australia)
915M band: 902 MHz to 928 MHz (USA)
2400M band: 2400MHz to 2500 MHz
Ordering information
N625PA-CC1352P7-868M CC1352P7 CC1190 CC2592 860-880MHz +27dBm
N625PA-CC1352P7-915M CC1352P7 CC1190 CC2592 910-930MHz +27dBm
Download