N627PA-CC1352P CC1190 CC2592 Module, +27dBm
- Detail
- Parameters
Radio module based TI CC1352P, CC1190 and CC2592.
N627PA CC1352P module designed for 868MHz, 915MHz and BLE 5.0 band. Up to 27dBm output power and down to -112dBm sensitivity at 868MHz, 915MHz, Up to 22dBm output power and down to -102dBm sensitivity at 2440MHz.
N627PA module is mainly for Internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. The module support 6LoWPAN, Amazon Sidewalk, Bluetooth low energy, IEEE 802.15.4, MIOTY, Matter, Proprietary, Thread, Wi-SUN, Wireless M-Bus, Zigbee Protocols. N627PA module leads most pins out of CC1352P for secondary development. N627PA (CC1352P) is suitable for free frequency band in EU and USA.
ISM Frequency supported by N627PA module
770M band: 770 MHz to 780 MHz (China)
868M band: 868 MHz to 870 MHz (China, EU, USA), 888 MHz to 889 MHz (Australia)
915M band: 902 MHz to 928 MHz (USA)
2400M band: 2400MHz to 2500 MHz
N627PA module Parameters
RF Interface | Parameter | Introduce |
Frequency | 868MHz, 915MHz, 2.4ghz | Support ISM |
Output Power | +27dBm at 868/915Mhz, +22dBm at 2440Mhz | The maximum power 500mW at 868/915Mhz, The maximum power 150mW at 2440Mhz |
Sensitivity | -112dBm at 868/915Mhz, -102dBm at 2440Mhz | Test at 50kbps in 868/915Mhz, Test at 250kbps in 2440Mhz |
Symbol Rate | 0.3-4000kbps | Software programming control |
Deviation | +/-10kHz | Antenna interface |
Distance | 8000m | In clear and open environment, the antenna gain is 3 dBi, the height above the ground is 2.5 meters, and the air speed is 1.2 kbps. |
Hardware parameters | Value | Remarks |
Size | 41 x 30 x 3mm | - |
Antenna Interface | IPEX, stamp hole | - |
Communication Interface | UART, SPI | Software programming |
Package | SMD | - |
Electrical Parameters | Minimum | Typical | Maximum |
Volt | 1.8V | 3.3V | 3.9V |
Emission Current | 550mA | ||
Receiving Current | 10mA | ||
Sleep current | 1uA | ||
Working Temperature | -30℃ | 75℃ |
N627PA's CC1190 control Logic
IO | TX | RX | SLEEP |
DIO30 | 1 | 0 | 0 |
DIO29 | 0 | 1 | 0 |
DIO30 | 1 | 1 | 0 |
N627PA Pinout Description
Pin Number | Function | Describe |
1 | RF | |
2 | GND | |
3 | NC | |
4 | NC | |
5 | NC | |
6 | NC | |
7 | NC | |
8 | NC | |
9 | NC | |
10 | DIO8 | MCU IO port |
11 | DIO9 | MCU IO port |
12 | DIO10 | MCU IO port |
13 | DIO11 | MCU IO port |
14 | DIO12 | MCU IO port |
15 | DIO13 | MCU IO port |
16 | DIO14 | MCU IO port |
17 | VCCPA | VCCPA |
18 | VCC | VCC |
19 | GND | GND |
20 | RESET | RESET |
21 | DIO15 | MCU IO port |
22 | TMS | TMS |
23 | TCK | TCK |
24 | DIO16 | MCU IO port |
25 | DIO17 | MCU IO port |
26 | DIO18 | MCU IO port |
27 | DIO19 | MCU IO port |
28 | DIO20 | MCU IO port |
29 | DIO21 | MCU IO port |
30 | DIO22 | MCU IO port |
31 | DIO23 | MCU IO port |
32 | DIO24 | MCU IO port |
33 | DIO25 | MCU IO port |
34 | DIO26 | MCU IO port |
35 | DIO27 | MCU IO port |
36 | GND | MCU IO port |
N627PA's Pinout Description
Ordering information
N627PA-CC1352P-868M CC1352P CC1190 860-880MHz +27dBm
N627PA-CC1352P-915M CC1352P CC1190 910-930MHz +27dBm
Download