CC2651P3 Dongle, +20dBm, N727AP
- Detail
- Parameters
Amplifier ZigBee/BLE dongle based TI CC2651P3 wireless MCU.
N727AP CC2651P3 amplifier ZigBee/BLE dongle designed for 2.4G band, ZigBee/BLE router or gateway uesd. The high power ZigBee/BLE dongle up to +20 dBm output power and down to -100dBm sensitivity.
N727AP radio dongle USB based TI wireless MCU CC2651P3. The dongle available frequence is from 2400M to 2500Mhz. The hardware is designed for maximum range, 400m + Range (Line of Sight, 250 kbps). N727AP is suitable for 2.4G ISM band in China, EU and USA. N727AP is a small size ZigBee and BLE RF dongle for Thread, Zigbee, Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems. All of the N727AP's electronics (including an antenna) reside on a single PCB. And CC2651P3 debug pin are pinout. The ZigBee/BLE CC2651P3 dongle USB intergrate CC2651P3, USB to UART chip, LED, PCB antenna and tact switch. CC2651P3 Dongle application ZigBee/BLE gateway, router, etc.
N727AP Dongle Master chip Description
The CC2651P3 device is a wireless MCU targeting Bluetooth, ZigBee® and 6LoWPAN, and ZigBee RF4CE remote control applications.
The device is a member of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications.
The CC2651P3 device contains a 32-bit ARM Cortex-M4 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultralow power sensor controller. This sensor controller is ideal for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2651 device is ideal for applications within a whole range of products including industrial, consumer electronics, and medical.
The Bluetooth Low Energy controller and the IEEE 802.15.4 MAC are embedded into ROM and are partly running on a separate ARM Cortex-M0 processor. This architecture improves overall system performance and power consumption and frees up flash memory for the application.
N727AP high power ZigBee Dongle Parameters
Protocols | IEEE 802.15.4, 6LoWPAN, ZigBee |
Frequency bands (MHz) | 2400-2500 |
TX power (Max) (dBm) | 20 |
RAM (KB) | 32 |
CPU core | Arm® Cortex®-M4 |
Peripherals | USB, LED, KEY |
RX current (lowest) (mA) | 15 |
Data rate (Max) (kbps) | 250 |
Operating temperature range (C) | -30 to 75 |
Package | USB 2.0 |
Size | 37x17x7mm |
Antenna Interface | PCB antenna, IPEX |
Ordering Information
N727AP-ZB CC2651P3 ZigBee/BLE USB dongle +20dBm
Download