1000 Milliwatts si4463 PA Module, 433/868/915Mhz
1000 Milliwatts si4463 PA Module, 433/868/915Mhz
N4543AS module based Silicon Labs si4463 FSK transceiver wireless chip, pa, the module designed for 433M/490M/ 868M/ 915Mhz Sub G band. N543AS can be program register for customizer. The N543AS module has +30 dBm output power and the sensitivity down to -126 dBm at 1.2 kbps. The module support long distance data broadcast and thread.
The SI4463 module has a small SMD package, Integrated SI4463 and pa and IPEX, it reduced a lot of development troubles.
N543AS module hardware is designed for maximum range, 10000m + Range (Low rate and Line of Sight).
SI4463 Features
Frequency range = 119–1050 MHz
Receive sensitivity =-126 dBm
Modulation (G)FSK, 4(G)FSK, (G)MSK OOK
Max output power +20 dBm (Si4464/63
Low active power consumption 10/13 mA RX
Ultra low current powerdown modes 30 nA shutdown, 50 nA standby
Data rate = 100 bps to 1 Mbps
Fast wake and hop times
Power supply = 1.8 to 3.6 V
Excellent selectivity performance 60 dB adjacent channel 75 dB blocking at 1 MHz
Antenna diversity and T/R switch control
Highly configurable packet handler
TX and RX 64 byte FIFOs
Auto frequency control (AFC)
Automatic gain control (AGC)
N543AS SI4463 Module Wireless protocols
6LoWPAN,
IEEE 802.15.4,
Proprietary,
Wireless M-Bus
N543AS SI4463 Module Parameters
Module | Introduce |
Interface | SPI |
Frequency | 433M, 490M, 868M, 915Mhz |
RF Data Rate | 0 - 500 kbps |
TX Power | +30 dBm |
RX Sensitivity | -126 dBm at 1.2kbps |
TX Current | 800 mA |
RX Current | 25 mA |
Frequency Deviation | +/- 10 Khz |
Communication Distance | 10 - 18000 m (Visual distance) |
Antenna Interface | RF pin, SMA |
Installation Mode | SMD, plug-in |
Volume (mm) | 36 mm x 24 mm x 3 mm |
Operating Voltage | 2 - 3.6 V |
PA Operating Voltage | 4.5 - 5.5 V, type 5V |
Working Temperature and Humidity Environment | Temperature: -40 - 80℃; Humidity 10 - 95 %RH |
Storage Temperature and Humidity Environment | Temperature: -40 - 80℃; Humidity 10 - 95 %RH |
Weight (kg) | ≈10g |
N543AS Si4463 Module pinout Description
Pin name | Description | Pin name | Description | ||
1 | GND | Ground | 12 | DIO0 | RESET |
2 | VCCPA | 5V | 13 | DIO1 | MCU I/O |
3 | VCCPA | 5V | 14 | DIO2 | MCU I/O |
4 | GND | Ground | 15 | DIO3 | MCU I/O |
5 | GND | Ground | 16 | SCK | SPI |
6 | RXEN | MCU I/O | 17 | MISO | SPI |
7 | TXEN | MCU I/O | 18 | MOSI | SPI |
8 | LNAEN | MCU I/O | 19 | NSS | SPI |
9 | VCC | 2-3.6V | 20 | GND | GND |
10 | GND | GND | 21 | RF | RF PIN |
11 | RESET | MCU I/O |
N543AS Module Package
How to used N543AS Module
1. PA, LNA, SWITCH user's guide
TXEN | RXEN | LENAN | |
Transmitt | 1 | 0 | 1 |
Receive | 0 | 1 | 0 |
Sleep | 0 | 0 | 1 |
Note: TXEN, RXEN, LNAEN is connect to MCU IO port, the IO is 3.3V cmos level. The max cmos level is 3.6V.
2. connect N543AS to MCU SPI port.
For MCU，please change the code to suit for the MCU.
Then you can down load your code and test it.