N526AP: CC1120 Narrowband USB Dongle | 169/433/868/915MHz | +15dBm | 1500m Range | Sigfox Ready
- Detail
- Parameters
N526AP USB Dongle
CC1120 Narrowband Development Tool | Plug & Play
📡 Core Features
Chipset: TI CC1120 + MCU + TCXO
Interface: USB 2.0 (Virtual COM Port)
Frequency: 169, 433, 868, 915 MHz
Output Power: +15 dBm
Sensitivity: -120 dBm @ 1.2kbps
Range: Up to 1500 m
Antenna: Integrated Spring + IPEX
Size: 45 x 19 x 8 mm (USB Stick)
⚡ Quick Specifications
| Parameter | Value |
|---|---|
| Supply | 5V from USB |
| TX Current | ~65 mA |
| RX Current | ~35 mA |
| Data Rate | 0.3 - 200 kbps |
| Modulation | 2-FSK, 4-FSK, MSK, OOK |
| Temp Range | -40°C to +75°C |
🎯 Perfect For:
Sigfox Device Prototyping
Field Testing Wireless Networks
IoT Data Logging to PC
Wireless Communication Labs
Industrial Configuration Tools
🔧 Two Ways to Use It
Simple Mode: Plug in, open a serial terminal, and start sending/receiving wireless data.
Developer Mode: Program the onboard MCU with custom firmware for advanced control and protocols.
🛒 Available Models
N526AP-169M: 160-175MHz (Utility)
N526AP-433M: 410-480MHz (Global)
N526AP-868M: 860-930MHz (EU Sigfox)
🚀 Get Started in Minutes
Plug the dongle into a USB port.
Open your favorite serial terminal (e.g., PuTTY, CoolTerm).
Select the new COM port that appears.
Send commands to configure frequency, power, and start communicating.
From concept to wireless communication in under a minute. The N526AP is the ultimate rapid development tool for narrowband IoT.