Radio CC1121 transceiver module based CC1121 and CC1190 chip.
N516BS based CC1121 transceiver module and CC1190 chip. 868M and 915Mhz mode used. SPI control. Up to 27dBm output power and Sensitivity down to -123dBm. N516BS has SMD and plug-in installation mode. Use FSK modulation. Occupies normal bandwidth.
N516BS hardware is designed for maximum range,5000m + Range (Line of Sight).
CC1121 Introduction
The CC1121 transceiver device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 274–320 MHz, 410–480 MHz, and 820–960 MHz.
The CC1121 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1121 device can be controlled through an SPI interface. In a typical system, the CC1121 device will be used with a microcontroller and only a few external passive components.
High-Performance, Single-Chip Transceiver
Excellent Receiver Sensitivity:
–120 dBm at 1.2 kbps
–110 dBm at 50 kbps
Blocking Performance: 86 dB at 10 MHz
Adjacent Channel Selectivity: 60 dB
Very Low Phase Noise: –111 dBc/Hz at
10-kHz Offset
Separate 128-Byte RX and TX FIFOs
WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect Performance
Support for Seamless Integration With the CC1190 Device for Increased Range Giving up to 3-dB Improvement in Sensitivity and up to +27-dBm Output Power
Power Supply
Wide Supply Voltage Range (2.0 V to 3.6 V)
Low Current Consumption:
RX: 2 mA in RX Sniff Mode
RX: 17-mA Peak Current in Low-Power Mode
RX: 22-mA Peak Current in High-Performance Mode
TX: 45 mA at +14 dBm
Power Down: 0.12 μA (0.5 μA With eWOR Timer Running)
Programmable Output Power up to +16 dBm With 0.4-dB Step Size
Automatic Output Power Ramping
Configurable Data Rates: 1.2 to 200 kbps
Supported Modulation Formats: 2-FSK,
2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
RoHS-Compliant 5-mm x 5-mm No-Lead QFN 32-Pin Package (RHB)
Regulations – Suitable for Systems Targeting Compliance With
Europe: ETSI EN 300 220, ETSI EN 54-25
US: FCC CFR47 Part 15, FCC CFR47 Part 24
Japan: ARIB STD-T108
Peripherals and Support Functions
Enhanced Wake-On-Radio Functionality for Automatic Low-Power Receive Polling
Includes Functions for Antenna Diversity Support
Support for Retransmissions
Support for Auto-Acknowledge of Received Packets
TCXO Support and Control, also in Power Modes
Automatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) Systems
Built-in Coding Gain Support for Increased Range and Robustness
Digital RSSI Measurement
Temperature Sensor
ISM Frequency supported by N516BS module
868M band: 868 MHz to 870 MHz (China, EU, USA)
888 MHz to 889 MHz (Australia)
915M band: 902 MHz to 928 MHz (USA)
Parameter
Module | Introduce |
Interface | SPI |
Frequency | 860-960Mhz |
RF Data Rate | 0-200Kbps |
TX Power | +27dbm |
RX Sensitivity | -126dBm |
TX Current | 500mA |
RX Current | 35mA |
Frequency Deviation | +/- 2Khz |
Communication Distance | 10 - 10000m(Visual distance) |
Antenna Interface | RF pin, SMA |
Installation Mode | SMD, plug-in |
Volume (mm) | 36mm x 23mm x 3mm |
Operating Voltage | 2 - 3.6V |
Working Temperature and Humidity Environment | Temperature: -40-80℃; Humidity 10-95%RH |
Storage Temperature and Humidity Environment | Temperature: -40-80℃; Humidity 10-95%RH |
Weight (kg) | ≈10g |
PIN define
Pin name | Description | Pin name | Description | ||
1 | GND | Ground | 9 | GPIO3 | MCU I/O |
2 | VCCPA | 2-3.9V | 10 | GPIO2 | MCU I/O |
3 | VCC | 2-3.6V | 11 | MOSI | SPI |
4 | TCXO | NC | 12 | SCK | SPI |
5 | HGM | MCU I/O | 13 | MISO | SPI |
6 | LNAEN | MCU I/O | 14 | GPIO0 | MCU I/O |
7 | PAEN | MCU I/O | 15 | CS | SPI |
8 | RESET | MCU I/O | 16 | GND | Ground |
N516BS typical application circuit
N516BS module pin diagram
N516BS module packaging diagram
Ordering information
N516BS-868M CC1121+CC1190 27dBm, 860-880MHz
N516BS-915M CC1121+CC1190 27dBm, 910-960MHz
Other modules
N511AS-169M CC1120 12dBm, SPI, Narrowband, 160-175MHz
N511AS-433M CC1120 12dBm, SPI, Narrowband, 410-480MHz
N511AS-868M CC1120 12dBm, SPI, Narrowband, 860-960MHz
N512AS-169M CC1120+mcu 12dBm, UART, Narrowband, 160-175MHz
N512AS-433M CC1120+mcu 12dBm, UART, Narrowband, 410-480MHz
N512AS-868M CC1120+mcu 12dBm, UART, Narrowband, 860-880MHz
N512AS-915M CC1120+mcu 12dBm, UART, Narrowband, 910-960MHz
N513AS-169M CC1120+mcu+PA+LNA 24dBm, UART, Narrowband, 160-175MHz
N513AS-433M CC1120+mcu+PA+LNA 24dBm, UART, Narrowband, 410-480MHz
N513AS-868M CC1120+mcu+PA+LNA 24dBm, UART, Narrowband, 860-880MHz
N513AS-915M CC1120+mcu+PA+LNA 24dBm, UART, Narrowband, 910-960MHz
N513FS-169M CC1120+mcu+PA+LNA 30dBm, UART, Narrowband, 160-175MHz
N513FS-433M CC1120+mcu+PA+LNA 30dBm, UART, Narrowband, 410-480MHz
N513FS-868M CC1120+mcu+PA+LNA 30dBm, UART, Narrowband, 860-880MHz
N513FS-915M CC1120+mcu+PA+LNA 30dBm, UART, Narrowband, 910-960MHz