CC1121 CC1190 Module, +27dBm, N516ES-B
- Detail
- Parameters
Radio module based CC1121 and CC1190 chip.
N516ES-B CC1121 transceiver module designed for 868M and 915M system. Up to 27dBm output power and Sensitivity down to -123dBm.
N516ES-B based CC1121 transceiver module and CC1190 chip. 868M and 915Mhz mode used. SPI control. Up to 27dBm output power and Sensitivity down to -123dBm. N516ES-B has SMD nstallation mode. Use FSK modulation. Occupies normal bandwidth.
N516ES-B hardware is designed for maximum range,5000m + Range (Line of Sight).
ISM Frequency supported by N516ES-B module
868M band: 868 MHz to 870 MHz (China, EU, USA)
888 MHz to 889 MHz (Australia)
915M band: 902 MHz to 928 MHz (USA)
N516ES-B Parameter
| Module | Introduce |
| Interface | SPI |
| Frequency | 860-960Mhz |
| RF Data Rate | 0-200Kbps |
| TX Power | +27dbm |
| RX Sensitivity | -126dBm |
| TX Current | 500mA |
| RX Current | 35mA |
| Frequency Deviation | +/- 2Khz |
| Communication Distance | 10 - 5000m(Visual distance) |
| Antenna Interface | RF pin, IPEX |
| Installation Mode | SMD |
| Volume (mm) | 29.5mm x 21mm x 3mm |
| Operating Voltage | 2 - 3.6V |
| Working Temperature and Humidity Environment | Temperature: -40-80℃; Humidity 10-95%RH |
| Storage Temperature and Humidity Environment | Temperature: -40-80℃; Humidity 10-95%RH |
| Weight (kg) | ≈10g |
N516ES-B PIN define
| Pin name | Description | Pin name | Description | ||
| 1 | GND | Ground | 9 | GPIO3 | MCU I/O |
| 2 | VCCPA | 2-3.9V | 10 | GPIO2 | MCU I/O |
| 3 | VCC | 2-3.6V | 11 | MOSI | SPI |
| 4 | TCXO | NC | 12 | SCK | SPI |
| 5 | HGM | MCU I/O | 13 | MISO | SPI |
| 6 | LNAEN | MCU I/O | 14 | GPIO0 | MCU I/O |
| 7 | PAEN | MCU I/O | 15 | CS | SPI |
| 8 | RESET | MCU I/O | 16 | GND | Ground |
N516ES-B typical application circuit
N516ES-B module pin diagram
N516BS module packaging diagram
Ordering information
N516ES-B-868M CC1121+CC1190 27dBm, 860-880MHz
N516ES-B-915M CC1121+CC1190 27dBm, 910-960MHz