$4.00

N530BS CC1310 Module, +14dBm

  • Detail
  • Parameters

Radio module based TI CC1310F128RSM transceiver chip.

N530BS CC1310F128RSM(4XD) ultra small volume wireless module designed for 433M, 868M, 915MHz. AT command and WMBUS supports.

N530BS ultra small volume wireless module has the characteristics of low cost, low power consumption and very small size. Module is mainly for IoT, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N530BS leads all pins out of CC1310F128RSM chip for secondary development.

N530BS (CC1310) is suitable for free frequency band in EU and USA.


RF InterfaceParameter
Frequency433M, 860M, 960MHz
Output Power+14dBm
Sensitivity-124dBm
Symbol Rate0-4000kbps
Deviation+/-10kHz
Distance1000m


Hardware parametersValue
Module Size13 x 12 x 3mm
Antenna InterfaceIPEX, stamp hole
Communication InterfaceUART, SPI
PackageSMD


Electrical ParametersMinimumTypicalMaximum
Volt1.8V3.3V4.1V
Emission Current
24mA
Receiving Current
5.5mA
Sleep current
0.7uA
Working Temperature-30
75

ISM Frequency supported by N530BS transceiver module

433M band: 433 MHz to 435 MHz (China, EU)

470M band: 470 MHz to 510 MHz (China)

770M band: 770 MHz to 780 MHz (China)

868M band: 868 MHz to 870 MHz (China, EU, USA)

                       888 MHz to 889 MHz (Australia)

915M band: 902 MHz to 928 MHz (USA)


Module Pinout


Pin   Number

Function

Describe

1

DIO0

MCU IO port

2

DIO1

MCU IO port

3

DIO2

MCU IO port

4

TMS

MCU DEBUG

5

TCK

MCU DEBUG

6

DIO3

MCU IO port

7

DIO4

MCU IO port

8

GND

GND

9

VDD

CC1310 power

10

RESET

MCU RESET

11

DIO5

MCU IO port

12

DIO6

MCU IO port

13

DIO7

MCU IO port

14

DIO8

MCU IO port

15

DIO9

MCU IO port

16

GND

GND

17

RF

RF pin


Module EDA(mm)


Downloads

N530BS datasheet

CC1310 datasheet

simplelink_cc13x0_sdk_4_20_02_07

Module Support Wireless protocols

IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY®, Wireless M-Bus, WiSUN®, KNX RF, Amazon Sidewalk, proprietary systems, SimpleLink™ TI 15.4 stack (Sub-1 GHz), and dynamic multiprotocol manager (DMM)driver.

CC1310 Transceiver Introduce

The CC1310 transceiver device is a cost-effective, ultra-low-power, Sub-1 GHz RF device from Texas Instruments™ that is part of the SimpleLink microcontroller (MCU) platform. These devices all share a common, easy-to-use development environment with a single core software development kit (SDK) and a rich tool set. A one-time integration of the SimpleLink platform enables users to add any combination of devices from the portfolio into their design, allowing 100 percent code reuse when design requirements change. For more information, visit www.ti.com/simplelink.

With very low active RF and MCU current consumption, in addition to flexible low-power modes, the CC1310 device provides excellent battery life and allows long-range operation on small coin-cell batteries and in energy harvesting applications.

The CC1310 transceiver device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility. The low-power consumption of the CC1310 device does not come at the expense of RF performance; the CC1310 device has excellent sensitivity and robustness (selectivity and blocking) performance.

The CC1310 device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC/DC converter.

Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU that can be configured to handle analog and digital sensors; thus the main MCU (Arm® Cortex®-M3) can maximize sleep time.

The power and clock management and radio systems of the CC1310 device require specific configuration and handling by software to operate correctly, which has been implemented in the TI-RTOS. TI recommends using this software framework for all application development on the device. The complete TI-RTOS and device drivers are offered free of charge in source code.

N530BS Ordering information

N530BS-433M    CC1310F128RSM transceiver chip     +14 dBm, 410M-510MHz

N530BS-868M    CC1310F128RSM transceiver chip     +14 dBm, 860M-960MHz


Other modules

N532FS-433M     CC1310+PA              24dbm, 410Mhz-510Mhz

N532FS-868M     CC1310+PA              24dbm, 860Mhz-960Mhz

N620PA-868M     CC1310+CC1190     27dbm, 860Mhz-880Mhz

N620PA-915M     CC1310+CC1190     27dbm, 910Mhz-930Mhz

N532ES-433M     CC1310+PA             30dbm, 410Mhz-440Mhz

N532ES-490M     CC1310+PA             30dbm, 470Mhz-510Mhz

N532ES-868M     CC1310+PA             30dbm, 860Mhz-880Mhz

N532ES-915M     CC1310+PA             30dbm, 910Mhz-930Mhz


Files download

N530BS Software code example‍            Download N530BS datasheet            Download CC1310 datasheet



Model
N530BS
Modulation
FSK
Frequency
433M,868M,915MHz
Output Power
+14 dBm
Port
UART, SPI
Package
SMD
Brand
Coral RF
Size
29x21x3mm
Price
$4.00