N536AS radio module based TI CC1310 transceiver, PA and LNA.

N536AS CC1310 transceiver high power module designed for 868M, 915MHz band. Up to 33dBm output power, and down to -126dBm sensitivity.

N536AS transceiver high power module integrated TI CC1310F128 chip, high power PA and LNA, suitable for 868M and 915MHz band. The module support FSK modulation.

N536AS module up to 33dBm output power and down to -112dBm sensitivity( 50 Kbps). SPI port, RF pin or IPEX optional, SMD package, small size, the module is suitable for SMT production.

The high power module is designed with 4-layer board, with excellent impedance matching and anti-interference. The high power module is mainly for internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N536AS module leads most pins out of CC1310F128RGZ for secondary development. AT commands support.

N536AS (CC1310) is suitable for free frequency band in EU and USA.

CC1310 transceiver Description

The CC1310 transceiver device is a cost-effective, ultra-low-power, Sub-1 GHz RF device from Texas Instruments™ that is part of the SimpleLink™ microcontroller (MCU) platform. These devices all share a common, easy-to-use development environment with a single core software development kit (SDK) and a rich tool set. A one-time integration of the SimpleLink platform enables users to add any combination of devices from the portfolio into their design, allowing 100 percent code reuse when design requirements change. For more information, visit www.ti.com/simplelink.

With very low active RF and MCU current consumption, in addition to flexible low-power modes, the CC1310 device provides excellent battery life and allows long-range operation on small coin-cell batteries and in energy harvesting applications.

The CC1310 transceiver device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility. The low-power consumption of the CC1310 device does not come at the expense of RF performance; the CC1310 device has excellent sensitivity and robustness (selectivity and blocking) performance.

The CC1310 device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC/DC converter.

Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU that can be configured to handle analog and digital sensors; thus the main MCU (Arm® Cortex®-M3) can maximize sleep time.

The power and clock management and radio systems of the CC1310 device require specific configuration and handling by software to operate correctly, which has been implemented in the TI-RTOS. TI recommends using this software framework for all application development on the device. The complete TI-RTOS and device drivers are offered free of charge in source code.

ISM Frequency supported by N536AS high power module

868M band: 868 MHz to 870 MHz (China, EU, USA)

                       888 MHz to 889 MHz (Australia)

915M band: 902 MHz to 928 MHz (USA)

N536AS high power Module Parameters

N536AS pinout Description

N536AS high power module package information

D‍ownloads

N536AS datasheet‍

CC1310 Datasheet

simplelink_cc13x0_sdk_4_20_02_07

Ordering information

N536AS-868M     CC1310+PA+LNA             33dbm, 860Mhz-880Mhz

N536AS-915M     CC1310+PA+LNA             33dbm, 910Mhz-930Mhz