The high power module is designed with 4-layer board, with excellent impedance matching and anti-interference. The high power module is mainly for internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N536AS module leads most pins out of CC1310F128RGZ for secondary development. AT commands support. N536AS (CC1310) is suitable for free frequency band in EU and USA.
Module Interface | Parameter | Introduce |
Frequency | 433M, 868M, 915MHz | Support ISM |
Output Power | +35dBm | The maximum power 3000mW |
Sensitivity | -113dBm | test at 50kbps |
Symbol Rate | 0.3-500kbps | Software programming control |
Deviation | +/-10kHz | - |
Module Size | 36 x 24 x 3mm | - |
Antenna Interface | IPEX, stamp hole | - |
Communication Interface | UART, SPI | Software programming |
Package | SMD | - |
Volt | 3.3V | - |
PA Volt | 5V | - |
Emission Current | 1300mA | Instantaneous power consumption |
Receiving Current | 16mA | - |
Sleep current | 1uA | Software programming control |
Working Temperature | -30℃--+75℃ | - |
Distance | 10000m | In clear and open environment, the antenna gain is 3 dBi, the height above the ground is 2.5 meters, and the air speed is 1.2 kbps. |
Pin Number | Function | Pin Number | Function |
1 | GND | 19 | DIO14 |
2 | GND | 20 | DIO15 |
3 | VCCPA | 21 | TMS |
4 | VCCPA | 22 | TCK |
5 | GND | 23 | RESET |
6 | DIO2 | 24 | DIO16 |
7 | DIO3 | 25 | DIO17 |
8 | DIO5 | 26 | DIO18 |
9 | DIO6 | 27 | DIO19 |
10 | DIO7 | 28 | DIO20 |
11 | DIO8 | 29 | DIO21 |
12 | DIO9 | 30 | DIO22 |
13 | DIO10 | 31 | DIO23 |
14 | VCC | 32 | DIO24 |
15 | GND | 33 | DIO25 |
16 | DIO11 | 34 | RF |
17 | DIO12 | 35 | GND |
18 | DIO13 |
CC1310 Datasheet
simplelink_cc13x0_sdk_4_20_02_07
N539AS-433M CC1310+PA+LNA 35dbm, 410Mhz-510Mhz
N539AS-868M CC1310+PA+LNA 35dbm, 860Mhz-880Mhz
N539AS-915M CC1310+PA+LNA 35dbm, 910Mhz-930Mhz