CC2500PA Module, +19dBm, N202AP
- Detail
- Parameters
Radio module based TI CC2500 and CC2591.
N202AP designed for 2400MHz ISM band. Up to 19dBm output power and down to -106dBm sensitivity. Arduino support.
N202AP CC2500 module leads all pins out for secondary development. N202AP is suitable for free frequency band in EU and America.
N202AP CC2500 Description
The CC2500 is a low-cost 2.4 GHz transceiver designed for very low-power wireless applications. The circuit is intended for the 2400-2483.5 MHz ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band. The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500 kBaud. CC2500 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of CC2500 can be controlled via an SPI interface. In a typical system, the CC2500 will be used together with a microcontroller and a few additional passive components.
N202AP Parameters
Protocols | IEEE 802.15.4 |
Frequency bands (MHz) | 2400-2483 |
TX power (Max) (dBm) | 19 |
RX current (lowest) (mA) | 18 |
TX current (lowest) (mA) | 160 |
Sleep current (lowest) (uA) | 1 |
Peripherals | SPI |
Data rate (Max) (kbps) | 500 |
Operating temperature range (C) | -30 to 75 |
Package | Plug-in |
Size | 31 x 33 x 3mm |
Antenna Interface | RF pin, SMA |
N202AP Ordering information
N202AP-2400M CC2500 CC2591 FSK, 20dBm, 2400M - 2483MHz