CC2640 CC2592 Dongle, +22dBm, N721AP
- Detail
- Parameters
Amplifier BLE dongle based TI BLE CC2640 wireless MCU and CC2592.
N721AP CC2640 amplifier BLE dongle designed for 2.4G band, BLE router or gateway uesd. The high power BLE dongle up to +21 dBm output power and down to -100dBm sensitivity.
N721AP BLE dongle USB based TI wireless MCU CC2640. The dongle available frequence is from 2400M to 2500Mhz. The dongle hardware is designed for maximum range, 500m + Range (Line of Sight, 250 kbps). N721AP is suitable for 2.4G ISM band in China, EU and USA. N721AP dongle is a small size BLE RF dongle for Thread. All of N721AP's electronics (including an antenna) reside on a single PCB. And CC2640 debug pin are pinout. The BLE CC2640 dongle USB intergrate CC2640, USB to UART chip, LED, PCB antenna and tact switch. CC2640 Dongle application BLE gateway, router, etc.
N721AP Dongle Master Chip Description
The CC2640R2F-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU) targeting Bluetooth ® 4.2 and Bluetooth ® 5 low energy automotive applications such as Passive Entry/Passive Start (PEPS), remote keyless entry (RKE), car sharing, piloted parking, cable replacement, and smartphone connectivity.
With very low active RF and MCU current consumption, in addition to flexible low power modes, the CC2640R2F-Q1 provides excellent battery life and allows long-range operation on small coin-cell batteries and a low power-consumption footprint for nodes connected to the car battery. Excellent receiver sensitivity and programmable output power provides industry-leading RF performance that is required for the demanding automotive RF environment.
CC2640R2F-Q1 wireless MCU contains a 32-bit Arm® Cortex®-M3 processor that runs at 48 MHz as the main application processor and includes the Bluetooth ® 4.2 low energy controller and host libraries embedded in ROM. This architecture improves overall system performance and power consumption and frees up significant amounts of flash memory for the application.
N721AP Dongle Parameters
Protocols | IEEE 802.15.4, BLE |
Frequency bands (MHz) | 2400-2500 |
TX power (Max) (dBm) | 21 |
RAM (KB) | 28 |
CPU core | Arm® Cortex®-M3 |
Peripherals | USB, LED, KEY |
RX current (lowest) (mA) | 35 |
Data rate (Max) (kbps) | 2000 |
Operating temperature range (C) | -30 to 75 |
Package | USB 2.0 |
Size | 37 x 17 x 7mm |
Antenna Interface | PCB antenna, IPEX |
Ordering Information
N721AP-BLE CC2650 + CC2592 BLE USB Dongle +20dBm
Download