ZigBee/BLE USB dongle based TI CC2650 wireless MCU.

N732HP CC2650 ZigBee/BLE USB dongle designed for 2.4G band, ZigBee/BLE router or gateway uesd. The ZigBee dongle up to +5 dBm output power and down to -100dBm sensitivity at 250kbps.

N732HP radio dongle usb based TI wireless MCU CC2650 and USB to UART chip. The dongle available frequence is from 2400M to 2500Mhz. The hardware is designed for maximum range, 100m + Range (Line of Sight, 250 kbps). N732HP is suitable for 2.4G ISM band in China, EU and USA. N732HP is a small size (pcb size: 37x17x7mm) ZigBee and BLE RF dongle for Thread, Zigbee, Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems. All of N732HP's electronics (including an antenna) reside on a single PCB. And CC2650 debug pin are pinout. The ZigBee/BLE dongle USB intergrate CC2650, LED, PCB antenna, USB to UART chip and tact switch. Dongle application ZigBee gateway, router, etc.

N732HP Dongle Master Chip CC2650 Description

The CC2650 device is a wireless MCU targeting Bluetooth, ZigBee® and 6LoWPAN, and ZigBee RF4CEremote control applications.The device is a cost-effective, ultralow power, 2.4-GHz RF devices. The CC2650 device contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the mainprocessor and a rich peripheral feature set that includes a unique ultralow power sensor controller. Thus, the CC2650 device is ideal forapplications within a whole range of products including industrial, consumer electronics, and medical.The Bluetooth Low Energy controller and the IEEE 802.15.4 MAC are embedded into ROM and are partlyrunning on a separate ARM Cortex-M0 processor. This architecture improves overall system performanceand power consumption and frees up flash memory for the application.

N732HP ZigBee Dongle Parameters

Ordering Information

N732HP     CC2650   ZigBee USB dongle      +5dBm

Download

N732HP Dongle datasheet‍

‍C‍C2650 DATASHEET‍