N516ES radio module based CC1201 and CC1190 chip.
N516ES based CC1201 and CC1190 chip. 868M and 915Mhz used. SPI control. Up to 27dBm output power and Sensitivity down to -123dBm. N516ES has SMD and plug-in installation mode. Use FSK modulation.
N516ES hardware is designed for maximum range,5000m + Range (Line of Sight).
CC1201 Introduce
The CC1201 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 164–190 MHz, 410–475 MHz, and 820–950 MHz.
The CC1200 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1200 device can be controlled through an SPI interface. In a typical system, the CC1200 device will be used with a microcontroller and only a few external passive components.
RF Performance and Analog Features:
High-Performance, Single-Chip Transceiver
Excellent Receiver Sensitivity:
–123 dBm at 1.2 kbps
–109 dBm at 50 kbps
Blocking Performance: 86 dB at 10 MHz
Adjacent Channel Selectivity: Up to 60 dB at 12.5-kHz Offset
Very Low Phase Noise: –114 dBc/Hz at 10-kHz Offset (169 MHz)
Programmable Output Power Up to +16 dBm With 0.4-dB Step Size
Automatic Output Power Ramping
Supported Modulation Formats: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
Supports Data Rate Up to 1.25 Mbps in Transmit and Receive
Low Current Consumption:
Enhanced Wake-On-Radio (eWOR) Functionality for Automatic Low-Power Receive Polling
Power Down: 0.12 μA (0.5 μA With eWOR Timer Active)
RX: 0.5 mA in RX Sniff Mode
RX: 19 mA Peak Current in Low-Power Mode
RX: 23 mA Peak Current in High-Performance Mode
TX: 46 mA at +14 dBm
Other:
Data FIFOs: Separate 128-Byte RX and TX
Support for Seamless Integration With the CC1190 Device for Increased Range Providing up to 3-dB Improvement in RX Sensitivity and up to +27 dBm TX Output Power
Digital Features:
WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect Performance
Security: Hardware AES128 Accelerator
Data FIFOs: Separate 128-Byte RX and TX
Includes Functions for Antenna Diversity Support
Support for Retransmission
Support for Auto-Acknowledge of Received Packets
Automatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) Systems
Built-in Coding Gain Support for Increased Range and Robustness
Digital RSSI Measurement
Improved OOK Shaping for Less Occupied Bandwidth, Enabling Higher Output Power While Meeting Regulatory Requirements
Dedicated Packet Handling for 802.15.4g:
CRC 16/32
FEC, Dual Sync Detection (FEC and non-FEC Packets)
Whitening
Regulations – Suitable for Systems Targeting Compliance With
Europe: ETSI EN 300 220, EN 54-25
US: FCC CFR47 Part 15, FCC CFR47 Part 90
Japan: ARIB STD-T30, T67, T108
ISM Frequency supported by N516ES module
868M band: 868 MHz to 870 MHz (China, EU, USA)
888 MHz to 889 MHz (Australia)
915M band: 902 MHz to 928 MHz (USA)
N516ES Parameter
Module | Introduce |
Interface | SPI |
Frequency | 860-960Mhz |
RF Data Rate | 0-200Kbps |
TX Power | +27dbm |
RX Sensitivity | -123dBm |
TX Current | 500mA |
RX Current | 35mA |
Frequency Deviation | +/- 10Khz |
Communication Distance | 10 - 5000m(Visual distance) |
Antenna Interface | RF pin, SMA |
Installation Mode | SMD, plug-in |
Volume (mm) | 36mm x 23mm x 3mm |
Operating Voltage | 1.8 to 3.6V |
Working Temperature and Humidity Environment | Temperature: -30 to 70℃; Humidity 10-95%RH |
Storage Temperature and Humidity Environment | Temperature: -40 to 80℃; Humidity 10-95%RH |
Weight (kg) | ≈10g |
PIN define
Pin name | Description | Pin name | Description | ||
1 | GND | Ground | 9 | GPIO3 | MCU I/O |
2 | VCCPA | 2-3.9V | 10 | GPIO2 | MCU I/O |
3 | VCC | 2-3.6V | 11 | MOSI | SPI |
4 | TCXO | NC | 12 | SCK | SPI |
5 | HGM | MCU I/O | 13 | MISO | SPI |
6 | LNAEN | MCU I/O | 14 | GPIO0 | MCU I/O |
7 | PAEN | MCU I/O | 15 | CS | SPI |
8 | RESET | MCU I/O | 16 | GND | Ground |
N516ES typical application circuit
N516ES module pin diagram
N516ES module packaging diagram
Ordering information
N516ES-868M CC1201+CC1190 27dBm, FSK, 860-880MHz
N516ES-915M CC1201+CC1190 27dBm, FSK, 910-960MHz
Other modules
N511AS-169M CC1120 15dBm, SPI, Narrowband, 160-175MHz
N511AS-433M CC1120 15dBm, SPI, Narrowband, 410-480MHz
N511AS-868M CC1120 15dBm, SPI, Narrowband, 860-960MHz
N512AS-169M CC1120+mcu 15dBm, UART, Narrowband, 160-175MHz
N512AS-433M CC1120+mcu 15dBm, UART, Narrowband, 410-480MHz
N512AS-868M CC1120+mcu 15dBm, UART, Narrowband, 860-880MHz
N512AS-915M CC1120+mcu 15dBm, UART, Narrowband, 910-960MHz
N513AS-169M CC1120+mcu+PA+LNA 24dBm, UART, Narrowband, 160-175MHz
N513AS-433M CC1120+mcu+PA+LNA 24dBm, UART, Narrowband, 410-480MHz
N513AS-868M CC1120+mcu+PA+LNA 24dBm, UART, Narrowband, 860-880MHz
N513AS-915M CC1120+mcu+PA+LNA 24dBm, UART, Narrowband, 910-960MHz
N513FS-169M CC1120+mcu+PA+LNA 30dBm, UART, Narrowband, 160-175MHz
N513FS-433M CC1120+mcu+PA+LNA 30dBm, UART, Narrowband, 410-480MHz
N513FS-868M CC1120+mcu+PA+LNA 30dBm, UART, Narrowband, 860-880MHz
N513FS-915M CC1120+mcu+PA+LNA 30dBm, UART, Narrowband, 910-960MHz
Files download