N624PA RF Module | CC1314R10 + CC1190 | +27dBm | 868M/915MHz | 8km Range for IoT
- Detail
- Parameters
N624PA High-Performance Wireless MCU Module | +27 dBm, Pre-Integrated Protocol Support
Built on TI's CC1314R10 + CC1190 | 1 MB Flash for Rapid Development of Standard-Based IoT Networks
1. Overview
N624PA is a long-range Sub-1GHz wireless module designed for rapid deployment of standards-compliant IoT solutions. It combines Texas Instruments CC1314R10 wireless microcontroller with the CC1190 RF front-end, delivering a robust +27 dBm output power and excellent receiver sensitivity.
N624PA’s core value lies in its pre-integrated software support for major industry-standard protocols (such as Wi-SUN, Wireless M-Bus), significantly reducing development time, cost, and risk. It provides a certified, reliable RF communication platform, allowing developers to focus entirely on their application layer.
2. Core Value: Rapid Deployment vs. Full Customization
🚀 Accelerated Time-to-Market: Skip the years of RF stack development.
🛡️ Reduced Risk & Cost: Eliminate the hidden costs and risks associated with developing, maintaining, and certifying a proprietary RF protocol from scratch.
🌐 Standards Compliance & Interoperability: Built for seamless integration into existing utility networks (AMI), smart city infrastructure, and other ecosystems that mandate specific standards like Wi-SUN.
💡 Focus on Your Application: Free up engineering resources to innovate on your core application logic and user experience, rather than low-level wireless communication.
3. Key Features & Technical Specifications
3.1. RF & Performance
| Parameter | Specification |
|---|---|
| Chipset | CC1314R10 + CC1190 |
| Frequency Bands | N624PA-868M: 860-880 MHz (EU/ETSI) N624PA-915M: 902-928 MHz (US/FCC) |
| Max. Output Power | +27 dBm (with CC1190 PA enabled at 3.3V ) |
| RX Sensitivity | -112 dBm (typical, @ 50 kbps) |
| Typical Range | > 8 km (Line-of-sight) |
| Supported Protocols | Pre-integrated support for standards such as Wi-SUN, Wireless M-Bus. Full SDK. |
3.2. MCU & Memory
| Parameter | Specification |
|---|---|
| Core | ARM® Cortex®-M4F @ 48 MHz |
| On-Chip Flash | 1 MB (1024 KB) |
| RAM | 256 KB |
| Development Interface | AT Commands for application control + Full JTAG for advanced firmware development. |
3.3. Electrical & Physical
| Parameter | Specification |
|---|---|
| Supply Voltage | MCU & PA: 2.0 - 3.6 V (Single Supply Recommended) |
| Current Consumption | TX: ~390 mA (@ +27 dBm at 3.3V) RX: ~10 mA Sleep: < 1 µA (with RTC) |
| Operating Temperature | -30°C to +75°C |
| Dimensions | 32.8 x 24.6 x 3.0 mm |
| PCB & Mounting | 4-layer, robust design; Surface Mount (SMD). |
| Antenna Interface | 50Ω pad or IPEX connector (optional). |
4. Product Line Positioning: Find Your Fit
N624PA is designed for a fundamentally different development path compared to our full-stack modules.
| Feature Model | N620PA Module | N621PA Module | N622PA Module | N624PA Module (This Product) |
|---|---|---|---|---|
| Core MCU | CC1310 | CC1312R | CC1312R7 | CC1314R10 |
| On-Chip Flash | 128KB | 352KB | 704KB | 1 MB |
| Next Step | Learn More → | Learn More → | Learn More → | ⤓ Download datasheet |
Simple Selection Guide:
Choose the N62xPA Series (N620/N621/N622/N623/N624) if you are building a unique, proprietary protocol and have the resources for full-stack development.
Choose the N624PA if your project requires standard protocols (like Wi-SUN or Wireless M-Bus) or your primary goal is to minimize development time, cost, and risk.
5. Hardware Integration & Pinout
5.1. Critical Design Notes
Power Supply: A single 3.3V supply is recommended. Ensure provide >500mA peak current during transmission. Use bulk and decoupling capacitors close to the VCCPA and VDD pins.
Antenna: Must be a 50Ω matched antenna.
5.2. Essential Pinout Summary
| Pin | Name | Type | Critical Description |
|---|---|---|---|
| 1, 35 | GND | Power | Connected ground. |
| 2 | VCCPA | Power Input | PA supply (2.0-3.6V). |
| 3 | VDD | Power Input | Core MCU supply (2.0-3.6V). |
| 5, 6 | DIO2, DIO3 | Digital I/O | UART0 (RX/TX) for AT Command . |
| 16, 17 | TMS, TCK | Digital Input | JTAG pins. |
| 22 | RESET | Digital Input | Active-low reset. |
| 34 | RF | RF Output | 50Ω antenna port(ipex and RF pin optional). |
| 23-33 | DIO20-DIO30 | Digital/Analog I/O | Multifunction pins. |
For the complete pin assignment and alternate function mapping, please refer to the full Hardware Reference Design.
6. Ordering Information & Support
6.1. Standard Models
| Ordering Code | Target Region | Frequency Range |
|---|---|---|
| N624PA-868M | Europe, ETSI | 860 – 880 MHz |
| N624PA-915M | USA, FCC | 902 – 928 MHz |
Contact us for other frequency bands, custom protocol firmware, or volume pricing.
6.2. Start Your Project
📥 Download N624PA datasheet – Overview, key specs, and ordering guide.
📥 Request N624PA User Guide – (Available under NDA) Includes full datasheet, reference schematics, PCB layout, and BOM.
📦 Request Samples & Quote – Begin your evaluation and design-in process.
7. Discover the Long-Range Module
[🚀 Discover the 1W Basic Module] [🚀 Unlock the 2W High-Performance Module] [🚀 Unlock the 5W High-Performance Module]