$5.00

SX1276 Module, +20dBm, N426AS

  • Detail
  • Parameters

Lora radio module based Semtech SX1276 chip. 868M and 915MHz used.

N426AS SX1276 module Up to 20dBm output power and down to -148dBm sensitivity. SPI port.

N426AS module based Semtech SX1276 chip. 169M, 433M, 868M and 915MHz used, support loRa and FSK modulation. N426AS Module up to 19dBm output power and down to -148dBm sensitivity. SPI port, RF pin, SMD package, the module is suitable for SMT production.


N426AS module leads out all pins of sx1276 chip, Rapid development without understanding RF.


SX1276 chip Introduce

The SX1276 incorporates the LoRaTM spread spectrum modem which is capable of achieving significantly longer range than existing systems based on FSK or OOK modulation. At maximum data rates of LoRaTM the sensitivity is 8dB better than FSK, but using a low cost bill of materials with a 10ppm XTAL LoRaTM can improve receiver sensitivity by more than 20dB compared to FSK. LoRaTM also provides significant advances in selectivity and blocking performance, further improving communication reliability. For maximum flexibility the user may decide on the spread spectrum modulation bandwidth (BW), spreading factor (SF) and error correction rate (CR). Another benefit of the spread modulation is that each spreading factor is orthogonal - thus multiple transmitted signals can occupy the same channel without interfering. This also permits simple coexistence with existing FSK based systems. Standard GFSK, FSK, OOK, and GMSK modulation is also provided to allow compatibility with existing systems or standards such as wireless MBUS and IEEE 802.15.4g. More sx1276 information please visit www.semtech.com.


ISM Frequency supported by N426AS module


169M band: 169 MHz to 170 MHz (China, EU)

433M band: 433 MHz to 435 MHz (China, EU)

470M band: 470 MHz to 510 MHz (China)

770M band: 770 MHz to 780 MHz (China)

868M band: 868 MHz to 870 MHz (China, EU, USA)

                       888 MHz to 889 MHz (Australia)

915M band: 902 MHz to 928 MHz (USA)


If you need N426AS module to support other frequencies, please contact us.


RF rate of N426AS module


FSK: 0 to 300 Kbps

LoRa: 0 to 37.5 Kbps


APPLICATIONS

Lora network or point-to-point long distance transmission.


N426AS Technical Characteristics


Technical   CharacteristicsMINTYPMAXUNIT
Supply   Voltage1.83.33.7V
Frequency
169M, 433M, 868M, 915M
Hz
RF Output   Power
19
dBm
Sensitivity
-148
dBm
Data rate0
37.5kbps
Frequency Tolerance
+/-10
kHz
Current   Consumption (TX Mode)
100
mA
Current   Consumption (RX Mode)
9.9
mA
Current   Consumption (Standby mode)
0.2
uA
Operating   Temperature range-40
80


N426AS pin description

PadsNameDescriptionPadsNameDescription
1RF
10DIO3Connected to MCU IO   port
2GND
11DIO4Connected to MCU IO   port
3GND
12DIO5Connected to MCU IO   port
4SW1Connected to MCU IO   port13SCKSPI
5VCC1.8 - 3.6V14MISOSPI
6NRSTConnected to MCU IO   port15MOSISPI
7DIO0Connected to MCU IO   port16NSSSPI
8DIO1Connected to MCU IO   port17SW2Connected to MCU IO   port
9DIO2Connected to MCU IO   port



N426AS mechanical dimensions


N426AS mechanical dimensions





N426AS typical application circuit

Typical application circuit   

Download N426AS datasheet

Download sx1276 datasheet

Software example

         

Ordering information

N426AS-169M     Sx1276     LoRa, 19dBm, 169M - 170MHz

N426AS-433M     Sx1276     LoRa, 19dBm, 410M - 440MHz

N426AS-868M     Sx1276     LoRa, 19dBm, 860M - 880MHz

N426AS-915M     Sx1276     LoRa, 19dBm, 902M - 928MHz

Model
N426AS
Modulation
LoRa
Frequency
868MHZ,915MHZ
Output Power
+20 dBm
Port
SPI
Package
SMD
Brand
Coral RF
Size
17x16x3mm
Price
$5.00