N426DS SX1276 Module, +30dBm,866M,915MHZ
- Detail
- Parameters
N426DS high power LORA radio module based sx1276, PA and LNA.
N426DS integrated sx1276 transceiver, high power PA and LNA chip, suitable for 868MHz, 915M band.
N426DS high power module output power is +30 dBm. SX1276 transceiver module has the characteristics of low cost, low power consumption and small size. The transceiver module is designed with 4-layer board, with excellent impedance matching and anti-interference. The module is mainly for IoT, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N426DS leads all pins of SX1276 out for secondary development. The module support LoRaWAN protocol.
N426CS Technical Characteristics
Technical Characteristics | TYP | UNIT |
Supply Voltage | 3.3 | V |
| PA Supply Voltage | 5(4.5V-5.5V) | V |
Frequency | 868M, 915M | Hz |
RF Output Power | 30 | dBm |
Sensitivity | -148 | dBm |
Data rate (LoRa) | 0--37.5 | kbps |
Frequency Tolerance | +/-10 | kHz |
Current Consumption (TX Mode) | 800 | mA |
Current Consumption (RX Mode) | 15 | mA |
Current Consumption (Standby mode) | 0.2 | uA |
Operating Temperature range | -40 -- 80 | ℃ |
APPLICATIONS
LoRa network generally consists of terminal equipment, gateway equipment, network server and application server.
The terminal equipment is generally a small module or a terminal equipment with embedded modules. The transmission distance of such equipment can reach several kilometers, such as water and electricity meters, smoke alarms, pet trackers, logistics locators, etc.
Gateway devices are generally used to receive data sent by terminal devices and send them together. Therefore, they are usually called LoRa concentrators. When data is collected together, they are usually sent together. According to the network sending data, they can be divided into LoRa Ethernet gateway and LoRa-4G gateway.
The network server is generally a server built on the cloud, which is used to process the parameters uploaded by LoRa gateway and nodes, and belongs to the device server.
The application server is a client oriented server that converts data and provides it to users.
Ordering information
N426DS-433M Sx1276 LoRa, 30dBm, 860M - 960MHz