N532AS: CC1310 Sub-1GHz RF Module

Product Overview

N532AS is a compact, high-performance Sub-1GHz RF module featuring TI's CC1310F128 chip with integrated power amplifier (PA). Designed for long-range wireless communication with exceptional +25dBm output power and excellent receiver sensitivity.

Key Features

• High Power Output: +25dBm (316mW) with integrated PA

• Long Range: Up to 2000m transmission distance

• Multi-Band Support: 433MHz, 868MHz, 915MHz ISM bands

• Low Power Consumption: 6.9mA RX current, 1μA sleep current

• Compact Size: 30×21×3mm SMD package

• AT Command Support: Easy configuration and control

• Industrial Grade: -30°C to +75°C operating range

• Development Friendly: All pins accessible for custom applications

Technical Specifications

RF Performance

• Frequency Bands: 433MHz, 868MHz, 915MHz

• Output Power: Up to +25dBm (VCC=3V, VCCPA=5V)

• Receiver Sensitivity: -124dBm

• Data Rate: 0.3-4000 kbps (software programmable)

• Modulation: 2-FSK, 4-FSK, OOK, MSK

• Frequency Deviation: ±10kHz

Hardware Specifications

• Dimensions: 30mm × 21mm × 3mm

• Antenna Interface: IPEX connector + PCB antenna pad

• Communication Interfaces: UART, SPI

• Package Type: Surface Mount Device (SMD)

• Pin Count: 35 pins (all accessible)

Electrical Specifications

• MCU Supply Voltage: 2.5V-3.6V (3.3V typical)

• PA Supply Voltage: 3V-6V (5V typical)

• TX Current: 200mA (at +25dBm)

• RX Current: 6.9mA

• Sleep Current: 1μA

• Operating Temperature: -30°C to +75°C

Protocol Support

• IEEE 802.15.4g

• 6LoWPAN (IPv6 for smart objects)

• MIOTY®

• Wireless M-Bus

• WiSUN®

• KNX RF

• Amazon Sidewalk

• SimpleLink™ TI 15.4 stack

• DMM (Dynamic Multiprotocol Manager)

• Proprietary protocols

Applications

• Smart Metering: AMI/AMR systems

• Home Automation: Smart lighting, security

• Industrial IoT: Wireless sensor networks

• Agriculture: Environmental monitoring

• Asset Tracking: Logistics and inventory

• Medical Devices: Wireless medical equipment

• Building Automation: HVAC control, energy management

Pin Configuration (Key Pins)

Development Features

• AT Command Interface: Easy configuration via UART

• Full Pin Access: All 35 pins accessible for customization

• Protocol Flexibility: Supports multiple wireless standards

• Development Tools: Compatible with TI's development ecosystem

• Reference Designs: Available for common applications

Ordering Information

Package Contents

• N532AS RF Module (1 piece)

• Basic documentation

• AT command reference

Regulatory Compliance

• EU: EN 300 220, EN 301 489

• RoHS: Compliant

• Lead-Free: Compliant

Quick Start Guide

1. Power Connections:

   • Connect VCC (pin 14) to 3.3V

   • Connect VCCPA (pin 13) to 5V for maximum power

   • Connect all GND pins to ground

2. Antenna Connection:

   • Connect antenna to IPEX connector

   • Ensure 50Ω impedance matching

3. Communication Setup:

   • Connect UART pins (configurable) to host MCU

   • Use AT commands for configuration

4. Basic AT Commands:

   • AT+VER: Check firmware version

   • AT+FREQ=868000000: Set frequency to 868MHz

   • AT+POW=20: Set power to 20dBm

   • AT+SEND=hello: Send data

Performance Tips

• For Maximum Range: Use 5V for VCCPA, directional antenna

• For Battery Operation: Adjust power level based on range needs

• Antenna Selection: Match antenna to frequency band

• PCB Layout: Follow reference design for optimal performance

Support Resources

• Datasheet: Complete technical specifications

• AT Command Manual: Detailed command reference

• Reference Schematics: Example circuit designs

• Application Notes: Design guidelines and tips

• Sample Code: Basic communication examples

Contact Information

Technical Support: info@coralradio.com