N624PA CC1314R10 CC1190 Module, +27dBm
- Detail
- Parameters
Radio module based TI wireless MCU CC1314R10 and CC1190.
N624PA CC1314R10 radio module designed for 868MHz and 915MHz band. Up to 27dBm output power, 50 kbps sensitivity is -112dBm.
N624PA rf module is mainly for Internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N624PA module leads most pins out of CC1314R10 for secondary development. N624PA (CC1314R10) wireless module is suitable for free frequency band in EU and USA.
N624PA module Parameters
RF Interface | Parameter | Introduce |
Frequency | 868MHz, 915MHz | Support ISM |
Output Power | +27dBm | The maximum power 500mW |
Sensitivity | -112dBm | 50kbps |
Symbol Rate | 0.3-4000kbps | Software programming control |
Deviation | +/-10kHz | Antenna interface |
Distance | 8000m | In clear and open environment, the antenna gain is 3 dBi, the height above the ground is 2.5 meters, and the air speed is 1.2 kbps. |
Hardware parameters | Value | Remarks |
Size | 32.8 x 24.6 x 3mm | - |
Antenna Interface | IPEX, stamp hole | - |
Communication Interface | UART, SPI | Software programming |
Package | SMD | - |
Electrical Parameters | Minimum | Typical | Maximum | Remarks |
Volt | 1.8V | 3.3V | 3.6V | |
Emission Current | 450mA | Instantaneous power consumption | ||
Receiving Current | 10mA | - | ||
Sleep current | 1uA | Software programming control | ||
Working Temperature | -30℃ | 75℃ | - |
N624PA's CC1190 control Logic
N624PA Pinout Description
Pin Number | Function | Describe |
1 | GND | |
2 | VCCPA | |
3 | VDD | CC1310 power |
4 | DIO1 | MCU IO port |
5 | DIO2 | MCU IO port |
6 | DIO3 | MCU IO port |
7 | DIO4 | MCU IO port |
8 | DIO5 | MCU IO port |
9 | DIO6 | MCU IO port |
10 | DIO10 | MCU IO port |
11 | DIO11 | MCU IO port |
12 | DIO12 | MCU IO port |
13 | DIO13 | MCU IO port |
14 | DIO14 | MCU IO port |
15 | DIO15 | MCU IO port |
16 | TMS | TMS |
17 | TCK | TCK |
18 | DIO16 | MCU IO port |
19 | DIO17 | MCU IO port |
20 | DIO18 | MCU IO port |
21 | DIO19 | MCU IO port |
22 | RESET | MCU IO port |
23 | DIO20 | MCU IO port |
24 | DIO21 | MCU IO port |
25 | DIO22 | MCU IO port |
26 | DIO23 | MCU IO port |
27 | DIO24 | MCU IO port |
28 | DIO25 | MCU IO port |
29 | DIO26 | MCU IO port |
30 | DIO27 | MCU IO port |
31 | DIO28 | MCU IO port |
32 | DIO29 | MCU IO port |
33 | DIO30 | MCU IO port |
34 | RF | Antanna connector |
35 | GND |
N624PA's Pinout Description
ISM Frequency supported by N624PA module
770M band: 770 MHz to 780 MHz (China)
868M band: 868 MHz to 870 MHz (China, EU, USA), 888 MHz to 889 MHz (Australia)
915M band: 902 MHz to 928 MHz (USA)
Ordering information
N624PA-CC1314R10-868M CC1314R10+CC1190 860-880MHz +27dBm
N624PA-CC1314R10-915M CC1314R10+CC1190 910-930MHz +27dBm
Download