N532AS CC1310 PA Module, +24dBm
- Detail
- Parameters
N532AS based TI CC1310 chip and PA.
CC1310 module suitable for 433M, 868M, 915MHz used. AT command supports. 24dBm output power.
N532AS module integrated TI CC1310F128 chip and PA, suitable for 433M, 868M and 915MHz band. CC1310 module has the characteristics of low cost, low power consumption and small size. The module is designed with 4-layer board, with excellent impedance matching and anti-interference. The module is mainly for IoT, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment.
N532AS module leads all pins out for secondary development.
N532AS Module Support Wireless protocols
IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY®, Wireless M-Bus, WiSUN®, KNX RF, Amazon Sidewalk, proprietary systems, SimpleLink™ TI 15.4 stack (Sub-1 GHz), and dynamic multiprotocol manager (DMM)driver. N532AS module (CC1310) is suitable for free frequency band in EU.
N532AS Module Parameter
RF Interface | Parameter |
Frequency | 433M, 868M, 915MHz |
Output Power | +24dBm |
Sensitivity | -124dBm |
Symbol Rate | 0.3-4000kbps |
Deviation | +/-10kHz |
Distance | 4000m |
Hardware parameters | Value |
Module Size | 36 x 22 x 3mm |
Antenna Interface | IPEX, stamp hole |
Communication Interface | UART, SPI |
Package | SMD |
Electrical Parameters | Typical |
Volt | 3.3V |
PA Volt | 5V |
Emission Current | 400mA |
Receiving Current | 6.9mA |
Sleep current | 1uA |
Working Temperature |
Files download